5-21/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Modules Supported
Beta Draft Confidential
Modules Supported
The FCP is available on the following CBX 500 and CBX 3500 I/O modules (IOMs):
CBX 500 CBX 3500
• 8-Port T1 and E1 modules • 4-Port OC-3c/STM-1
• 8-Port DS3 and E3 ATM UNI modules • 8-Port ATM DS3
• 4-Port ATM UNI OC-3c/STM-1 module • 1-Port STM1/E1 IMA Enhanced
• 1-Port OC-12c/STM-4 module • 3-Port Channelized ATM IMA Enhanced
• 3-Port Channelized DS3/1 IMA module
• 1-Port Channelized STM-1/E1 IMA
module
Note – Contact a qualified Lucent organization for network design validation before
enabling the FCP.
Note – FCP is not supported on the 16-Port ATM UNI OC-3c/STM-1 module or
24-Port DS3 ATM UNI module on the CBX 3500.
To Next Page
Loading...
Need help?
General
