Beta Draft Confidential
8-261/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring ATM Over MPLS Trunks
Configuring Feeder Logical Ports
ATM FCP Attributes (CBX 500 and CBX 3500)
Cascade Communications Resource Management (CCRM) cells are a subset of the
ATM Forum’s ATM Traffic Management, Version 4.0, ABR resource management
(RM) cells.
Refer to Chapter 6, “Working with the ATM FCP” for more information about ATM
FCP attributes. The ATM FCP tab in the Add Logical Port dialog box is shown in
Figure 8-13.
Figure 8-13. Add Logical Port: ATM FCP Tab
Note – Contact a qualified Lucent organization for network design validation before
enabling ATM Flow Control Processor (FCP) attributes.
To Next Page
Loading...
Need help?
General
