Beta Draft Confidential
17-21/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring SVC Parameters
Configuring SVC Attributes
Configuring SVC Attributes
To set SVC parameters:
1. In the Switch tab, expand either the Cards or LPorts node and locate the node for
the logical port you want to configure.
2. Right-click on the LPort instance node, and select Configure SVCs from the
pop-up menu (Figure 17-1).
Figure 17-1. Configuring LPort SVC Parameters in the Switch Tab
The Configure SVC dialog box appears (Figure 17-2 on page 17-3).
To Next Page
Loading...
