A-101/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Adjusting the CAC
Configuring the CAC
Beta Draft Confidential
Customizing the CAC for VBR-NRT and ABR
To customize the CAC for VBR-NRT and ABR:
1. In the Set All CAC Parameters dialog box (Figure A-1 on page A-4), select
Customized VBRnrt and ABR in the CAC Type field.
2. See “Tuning the CAC” on page A-5 to enter the desired values for the CLR and
CDV objectives.
3. See “Customizing the CAC for VBR-RT, VBR-NRT, and ABR” on page A-7 to
enter the desired values in the Port Scale Factors and SCR Limit Scale Factors
fields.
4. When you finish, choose OK to send these values to the selected switch. You will
need to perform a PRAM Sync for the CAC to be updated in the switch
configuration.
To Next Page
Loading...
Need help?
General
