Beta Draft Confidential
Configuring ATM Over MPLS Gateway Solution on CBX 3500
Configuring a Layer 2 Tunnel Over MPLS Core Network
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/059-47
When you have completed the fields in the General tab, continue with “RSVP
Signalling Attributes.”
RSVP Signalling Attributes
The second tab displayed in the Add Tunnel dialog box depends on which signalling
protocol was selected for this tunnel. Table 9-18 lists the possible signalling protocols
and applications.
Table 9-18. Signalling Protocol Tabs in Add Tunnel Dialog Box
Signalling Protocol Application See...
RSVP-TE
• PWE3 over MPLS core network
“RSVP-TE
Attributes” on
page 9-48
• Layer 2 tunnel over MPLS core
network
Static
• PWE3 over MPLS core network
“Static Attributes” on
page 9-49
• Layer 2 tunnel over MPLS core
network
To Next Page
Loading...
