xxxviii1/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
About This Guide
Beta Draft Confidential
This guide describes the processor and input/output modules
on each switch platform, and how to configure physical ports,
timing, and other attributes through Navis EMS-CBGX.
Switch Module
Configuration
Guide
Configuration
Guides
The following guides describe how to configure WAN
services on the supported switch platforms:
• Frame Relay Services Configuration Guide for
CBX 3500, CBX 500, and B-STDX 9000
• ATM Services Configuration Guide for
CBX 3500, CBX 500, GX 550, and B-STDX 9000
• IP Services Configuration Guide for CBX 3500,
CBX 500, and B-STDX 9000
This guide describes procedures for upgrading a Lucent
switch to the current release.
Switch Software
Upgrade Guide
This guide describes how to monitor and diagnose problems
in your Navis EMS-CBGX switch network.
Diagnostics
User’s Guide
To Next Page
Loading...
