Lucent Technologies CBX 3500 - Page 183

Beta Draft Confidential
Configuring ATM Logical Ports on Frame-based Modules
Defining ATM Direct Trunk and OPTimum Cell Trunk Logical Ports
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/054-39
When you finish setting these attributes, continue with the section, “Completing
the Logical Port Configuration” on page 4-52.
Table 4-15. Configuring Direct Cell Trunk/OPTimum Cell Trunk
Attributes
For 1-port ATM CS DS3/E3 or
1-port ATM IWU OC-3c/STM-1
cards see...
For ATM DS3/E3 UNI cards see...
“Discard/Congestion Mapping
Attributes” on page 4-47
“Trap Control Attributes” on page 4-31
“OPTimum Trunk VPI Range
Attributes” on page 4-50
“Priority Frame Attributes” on
page 4-34
“OPTimum Trunk VPI Range
Attributes” on page 4-50