Lucent Technologies CBX 3500 - Page 28

xxviii1/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Contents
Beta Draft Confidential
Figure 18-3. Add OffNet Circuit Dialog Box ................................................. 18-10
Figure 18-4. Add OffNet Circuit: Administrative Tab.................................... 18-11
Figure 18-5. Add OffNet Circuit: Traffic Type Tab ....................................... 18-15
Figure 18-6. Add OffNet Circuit: User Preference Tab.................................. 18-21
Figure 18-7. Add OffNet Circuit: Accounting Tab......................................... 18-22
Figure 18-8. Add OffNet Circuit: Path Tab..................................................... 18-24
Figure 18-9. Define Path Dialog Box.............................................................. 18-25
Figure 18-10. PNNI Node ATM Address Dialog Box...................................... 18-25
Figure 18-11. Add OffNet Circuit: FRF.5 Tab.................................................. 18-27
Figure 18-12. Add Offnet Point-to-Multipoint PVC Root Dialog Box............. 18-30
Figure 18-13. Select Endpoint Dialog Box ....................................................... 18-31
Figure 18-14. Add Offnet Point-to-Multipoint PVC Root:
Administrative Tab..................................................................... 18-33
Figure 18-15. Add Offnet Point-to-Multipoint PVC Root: Traffic Type Tab .. 18-35
Figure 18-16. Add Point-to-Multipoint PVC Leaf Dialog Box ........................ 18-37
Figure 18-17. Select Endpoint Dialog Box (Offnet PMP Leaf)........................ 18-38
Figure 18-18. Select Endpoint: Address Tab .................................................... 18-39
Figure 18-19. Modify Point-to-Multipoint PVC Leaf Dialog Box ................... 18-41
Figure 19-1. Implementing CUGs..................................................................... 19-4
Figure 19-2. Defining a CUG Member ............................................................. 19-7
Figure 19-3. Add CUG Member Dialog Box.................................................... 19-8
Figure 19-4. Defining a CUG............................................................................ 19-9
Figure 19-5. Add CUG Dialog Box .................................................................. 19-9
Figure 20-1. Adding a Security Screen ............................................................. 20-8
Figure 20-2. Add Security Screen Dialog Box.................................................. 20-9
Figure 20-3. Assigning a Security Screen to a Logical Port ........................... 20-11
Figure 20-4. Activate and Assign Security Screen: Default Screen Tab ........ 20-11
Figure 20-5. Activate and Assign Security Screen: Assigned Screens Tab.... 20-13
Figure 21-1. Three-Tiered PNNI Routing Hierarchy Example......................... 21-9
Figure 21-2. Two-Tiered PNNI Routing Hierarchy Example......................... 21-10
Figure 21-3. Flow of PNNI Topology Information......................................... 21-11
Figure 21-4. Add Switch Dialog Box.............................................................. 21-22
Figure 21-5. Modify Switch Dialog Box......................................................... 21-23
Figure 21-6. Modify Switch: Reroute Tuning Tab.......................................... 21-23
Figure 21-7. VNN-PNNI Policy-based Routing Example .............................. 21-30
Figure 21-8. Add VPN Dialog Box................................................................. 21-33
Figure 21-9. Modify VPN Dialog Box............................................................ 21-35
Figure 21-10. Associate Policy Mapping to Switch Dialog Box ...................... 21-36
Figure 21-11. Add Logical Port: PNNI Tab...................................................... 21-39
Figure 21-12. Choose VPN/Policy Dialog Box ................................................ 21-40
Figure 21-13. Add PNNI Node Dialog Box...................................................... 21-43
Figure 21-14. Configure Pnni Address Summary Dialog Box.......................... 21-48
Figure 21-15. Add Logical Port: PNNI Tab...................................................... 21-51
Figure A-1. Set All CAC Parameters Dialog Box............................................. A-4
Figure G-1. Sample Network Addressing Scenario.......................................... G-2
Figure G-2. Sample Network Showing Port and Node Prefixes....................... G-5
Figure H-1. Adding a VNN Customer .............................................................. H-2
Figure H-2. Add Customer Dialog Box ............................................................ H-2