Beta Draft Confidential
Configuring ATM PVCs
Configuring Frame Relay-to-ATM Interworking Circuits
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/0510-57
ATM Endpoint Traffic Parameters
QoS Class
(Fwd/Rev)
Select the QoS class for forward and reverse traffic. The forward and
reverse QoS classes do not have to match. The QoS Class determines
which TDs you can select. For more information on QoS classes, see
Table 12-1 on page 12-3.
Note: For a CBX 500 that uses the FCP, RM cells are sent in the
backward direction. As a result, they assume the QoS class of the other
direction.
Priority
(Fwd/Rev)
(VBR-NRT and
VBR-RT QoS
classes on
CBX/GX only)
Select both the forward and reverse circuit priority, where 1 is the
highest priority and 4 is the lowest priority. The forward and reverse
circuit priority values do not have to match.
Table 10-12. Add PVC: Traffic Type Tab Fields (Continued)
Field Action/Description
To Next Page
Loading...
Need help?
General
