Beta Draft Confidential
11-141/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring Management Paths
Using MSPVCs
8. Use the information in Table 18-4 on page 18-12 to configure the Administrative
tab fields.
9. Choose the Traffic Type tab to set the TDs for this offnet circuit. See “Defining
TD Attributes” on page 12-11 for instructions on configuring these attributes.
10. Choose the User Preference tab to set the user preferences for this offnet circuit.
See “User Preference Attributes” on page 10-60 for instructions on configuring
these attributes.
11. Choose OK to create the new offnet circuit.
12. Continue with the next section, “Completing the Management Configuration” to
define the NMS path and static route.
To Next Page
Loading...
Need help?
General
