Beta Draft Confidential
12-101/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring ATM Traffic Descriptors
Configuring ATM TDs
7. Choose OK to set the ATM TD.
MBS CLP=0+1
(cells/sec)
Displays only if you selected a TD combination that includes MBS
CLP=0+1. If so, specify the MBS in CPS for combined high- and
low-priority traffic (that is, the CLP=0+1 cell stream).
MCR CLP=0
(cells/sec)
Displays only if you selected a TD combination that includes MCR
CLP=0. If so, specify the MCR in CPS for combined high-priority
traffic (that is, the CLP=0 cell stream).
Table 12-4. TD Types (Continued)
TD Type Description
To Next Page
Loading...
Need help?
General
