Beta Draft Confidential
17-361/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring SVC Parameters
Configuring Node Prefixes
For example, if you enter the partial E.164 AESA address 45-00000504 (which
uses 40 bits) as the port prefix, but only need to check the first 38 bits of the port
prefix for call screening and call routing (because the last two binary digits are
00), click the 38 radio button in the Bit Length field.
4. Configure the address and routing options using the steps on page 17-38,
“Defining Address and Routing Options.”
5. Choose OK to save this node prefix and close the Add SVC Node Prefix dialog
box.
Address you entered:
Address in binary (40 bits):
45-00000504
01000101-00000000000000000000010100000100
Address in binary (38 bits):
01000101-000000000000000000000101000001
To Next Page
Loading...
Need help?
General
