Beta Draft Confidential
Configuring SVC Parameters
Configuring SVC Port Prefixes
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/0517-51
3. When done, choose OK to save this port prefix and close the Add SVC Port Prefix
dialog box.
4. To configure additional port prefix options, see Table 17-12 on page 17-53.
Anycast (for Remote) Select this check box if the format type is an
anycast version.
Address (for Remote) Enter the address of the public network gateway
used to exit from the public network back to the
private network.
OK Saves any changes you made in the current dialog
box, then closes it.
Cancel Closes the dialog box without saving any of the
changes you made.
Apply Saves any changes you made in the dialog box and
leaves the dialog box open.
Table 17-11. Add SVC Port Prefix: Gateway Tab Fields (Continued)
Field Action/Description
To Next Page
Loading...
Need help?
General
