Beta Draft Confidential
Port Security Screening
Configuration Overview
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/0520-7
Summary
As you begin to design port security screening features for your network, keep the
following points in mind:
• Configure the default screen for a logical port. This default mode determines
whether to pass or block SVCs from certain addresses. The previous example
blocks all incoming SVCs for the logical port. You can quickly revert back to the
default mode if necessary.
• Configure and assign the security screen exceptions. The previous example passes
all incoming 1800 SVCs.
• Configure and assign any exceptions to these screens. The previous example
specifically blocks incoming SVCs from the 234 exchange; this includes
incoming SVCs from 1800234*.
To Next Page
Loading...
Need help?
General
