Beta Draft Confidential
2-261/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
About ATM Logical Ports
Administrative Tasks
Call Admission Control “Configuring VP Shaping on CBX 500
Virtual UNI Logical Ports” on page 3-25
“ATM Attributes” on page 4-21
Loss Threshold “ILMI/OAM Attributes” on page 3-34
“ILMI/OAM Attributes” on page 4-26
DTE Prefix Screen Mode “ILMI/OAM Attributes” on page 3-34
NTM Congestion Thresholds
(T, Notification Time; CT1, CT2,
CT3, CT4 Thresholds)
“Completing the Logical Port
Configuration” on page 3-57
See the Switch Diagnostics User’s Guide for
CBX 3500, CBX 500, GX 550, and B-STDX
9000 for information about configuring
these parameters.
CBR, VBR-RT, VBR-NRT,
ABR/UBR Routing Metric Options
and Oversubscription %
“Setting QoS Parameters” on page 3-51
Hold Down Timer (0..255) “Setting Logical Port Attributes” on
page 3-14
Discard Priority Mapping (DE/CLP)
and Congestion Mapping
(FECN/EFCI)
“Discard/Congestion Mapping Attributes”
on page 4-47
LMI Update Delay “Link Management Attributes” on
page 4-43
CIR Policing Enabled “Link Management Attributes” on
page 4-43
RLMI Max Full Status Attempts “Link Management Attributes” on
page 4-43
Static Delay “Configuring an ATM NNI Logical Port” on
page 21-50
“Adding a Trunk” on page 7-18
Trunk Admin Cost “Adding a Trunk” on page 7-18
Subscription Factor (%) “Adding a Trunk” on page 7-18
Area ID “Adding a Trunk” on page 7-18
Table 2-6. Non-disruptive Logical Port and Trunk Attributes (Continued)
Attribute See
To Next Page
Loading...
