ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 F-1
Beta Draft Confidential
F
Reliable Scalable Circuit
The tables in this appendix list the NMS SNMP set errors that can occur during
Circuit Add, Modify, and Delete operations for standard and redirect permanent
virtual circuits (PVCs).
This appendix contains:
• “Circuit Add Errors” on page F-3
• “Circuit Modify Errors” on page F-5
• “Circuit Delete Errors” on page F-6
When you perform these operations, any errors (and the circuit endpoints that caused
them) are reported. When an error occurs, the Abort, Retry, and Ignore options
available to you are sensitive to the endpoint that caused the failure.
Error information is based on both the endpoint that experiences the SNMP set failure
and the type of SNMP set failure. Types of failures include time-outs (usually caused
by switch reachability problems) and circuit-not-present conditions (usually caused by
disabled or missing endpoint cards). For each error combination (circuit operation,
type of error, and endpoint failure), the error information indicates:
• The effect on the NMS database
• The state of both switches
• The out of sync status
• The effect of performing a PRAM sync
• Other special considerations
To Next Page
Loading...
Need help?
General
