Rohde & Schwarz R&S ZNA Series - Page 1792

Annexes
R&S
®
ZNA
1792User Manual 1178.6462.02 ─ 29
ENA Emulation Command R&S ZNA Default Parser Command
MMEMory:STORe:STYPe {STATe | CSTate |
DSTate | CDSTate}
MMEMory:STORe:STATe
Always saves measurement conditions and calibra-
tion state (CSTate), regardless of what you set it to.
SENSe{1...4}:AVERage:CLEar
[SENSe<Ch>:]AVERage:CLEar
SENSe{1...4}:AVERage:COUNt <numeric>
[SENSe<Ch>:]AVERage:COUNt
SENSe{1...4}:AVERage[:STATe] {ON | OFF
| 1 | 0}
[SENSe<Ch>:]AVERage[:STATe]
SENSe{1...4}:BWIDth[:RESolution]
<bandwidth>
[SENSe<Ch>:]BWIDth[:RESolution]
SENSe{1...4}:CORRection:COLLect[:
ACQuire]:LOAD <numeric>
SENSe{1...4}:CORRection:COLLect[:
ACQuire]:OPEN <numeric>
SENSe{1...4}:CORRection:COLLect[:
ACQuire]:SHORt <numeric>
SENSe{1...4}:CORRection:COLLect[:
ACQuire]:ISOLation <numeric1>,
<numeric2>
SENSe{1...4}:CORRection:COLLect[:
ACQuire]:THRU <numeric1>, <numeric2>
[SENSe<Ch>:]CORRection:COLLect[:
ACQuire]:SELected
SENSe{1..4}:CORRection:COLLect:CKIT[:
SELect] <integer>
[SENSe:]CORRection:CKIT:SELect
SENSe{1...4}:CORRection:COLLect:ECAL:
ISOLation[:STATe] {OFF | 0}
None (no action)
SENSe{1..4}:CORRection:COLLect:ECAL:
PATH <EcalPort>, <VnaPort>
[SENSe<Ch>:]CORRection:COLLect:AUTO:
PORTs
SENSe{1...4}:CORRection:COLLect:ECAL:
SOLT1 <numeric>
SENSe{1...4}:CORRection:COLLect:ECAL:
SOLT2 <numeric1>, <numeric2>
SENSe{1...4}:CORRection:COLLect:ECAL:
SOLT3 <numeric1>, <numeric2>,
<numeric3>
SENSe{1...4}:CORRection:COLLect:ECAL:
SOLT4 1,2,3,4
[SENSe<Ch>:]CORRection:COLLect:AUTO:
TYPE
SENSe{1...4}:CORRection:COLLect:ECAL:
UTHR[:STATe] {OFF | 0}
SENSe<ch>:CORRection:COLLect:GUIDed:
CKIT:PORT<pt>:CATalog?
[SENSe:]CORRection:CKIT:CATalog?
ENA emulation commands