Version 7.2 477 Mediant MSBR
Reference Guide 69. sip-definition
Command Description
Defines the SIP T.38 Version.
sip-uri-for-diversion-
Use Tel uri or Sip uri for Diversion header.
Defines the release cause for SIT.
skype-cap-hdr-enable
0 (default): Disable, 1:Add special header with capabilities
for Skype
src-hdr-4-called-nb
Select source header for called number (IP->TEL), either
from the user part of To header or the P-Called-Party-ID
header.
src-nb-as-disp-name
if set to 1 Use source number as display name if empty.if
set to 2 always use source number as display name .{@}if
set to 3 use the source number before manipulation, if
empty.
src-nb-preference
Defines from where the source number is taken (in an
incoming INVITE request).
Defines the SIP T1 timeout for retransmission.
Defines the SIP T2 timeout for retransmission.
Defines the fax max buffer size in T.38 SDP negotiation.
Defines the T.38 coder max datagram size.
T.38 Fax Session Immediate Start (Fax behind NAT)
Defines the T.38 packets received on RTP port.
tcp-keepalive-interval
Defines the interval between subsequent keep-alive
probes, regardless of what the connection has exchanged
in the meantime.
tcp-keepalive-retry
Defines the number of unacknowledged probes to send
before considering the connection down and notifying the
application layer.
tcp-keepalive-time
Defines the interval between the last data packet sent
(simple ACKs are not considered data) and the first
keepalive probe.
Defines the SIP TCP time out.
tel-to-ip-call-
Defines the Tel-to-IP call forking mode.
time-between-did-winks
Defines the time between first a
nd second Wink generation
(FXS).
tr104-voice-profile-
Defines the TR-104 Voice Profile Name.
Defines the Transparent code presentation.
uri-for-assert-id
Enables use of Tel uri or Sip uri for P-Asserted or P-
Preferred headers.
use-aor-in-refer-to-
If enabled, we will use URI from To/From headers in Refer
To header. If disabled, we will take the URI from Contact
To Next Page
Loading...
Need help?
General
