Reference Guide 558 Document #: LTRT-17939
Mediant MSBR
are also called options. The current set of DHCP options are documented in RFC 2131,
Dynamic Host Configuration Protocol.
Examples:
This example configures DHCP Option 19, which specifies whether the client should
configure its IP layer for packet forwarding. A value of “0” means disable IP forwarding; a
value of “1” means enable IP forwarding. IP forwarding is enabled in This example:
(config-data)# ip dhcp pool gigabitethernet 0/0
# option code 19 hex 01
This example configures DHCP option 72, which specifies the World Wide Web servers for
DHCP clients. World Wide Web servers 172.16.3.252 and 172.16.3.253 are configured in
This example:
# option code 72 ip 172.16.3.252 172.16.3.253