Reference Guide 690 Document #: LTRT-17939
Mediant MSBR
75.2.2.79.2.5 passive-interface
This command suppresses routing updates on an interface.
Syntax
passive-interface GigabitEthernet <slot/port[.vlanID]>
passive-interface GigabitEthernet <slot/port>
passive-interface vlan <vlanID>
no passive-interface interface
Interface Type (ifname) Interface ID
gigabitethernet
GigabitEthernet interface slot
and port (VLAN ID is optional)
[SLOT/PORT.VLANID]
cellular Cellular interface ID 0/0
gre Tunnel GRE ID [1-255]
ipip Tunnel IPIP ID [1-255]
l2tp L2TP ID [0-99]
pppoe PPPoE interface ID [1-3]
pptp PPTP ID [0-99]
vlan Vlan ID [1-3999]
loopback Loopback ID [1-5]
bvi Bridge interface [1-255]
Default
NA
Command Mode
Privileged User
Example
This example suppresses routing updates on an interface.
(config-data)# router ospf
(conf-router)# passive-interface GigabitEthernet 0/0.4
To Next Page
Loading...
