AudioCodes Mediant MSBR Series User Manual

Version 7.2 691 Mediant MSBR
Reference Guide 75. Layer-3 Commands
75.2.2.79.2.6 timers throttle spf
This command sets the initial delay, the initial-holdtime and the maximum-holdtime
between when SPF is calculated and the event which triggered the calculation.
Syntax
timers throttle spf delay initial-holdtime max-holdtime
no timers throttle spf
Command Description
delay Defines a number between 0 – 600000 delay in
milliseconds from 1
st
change received until SPF
calculation.
initial-holdtime
Defines the initial holdtime between 0 – 600000 in
milliseconds between consecutive SPF calculation.
maximum-holdtime
Defines the maximum holdtime between 0 – 600000 in
milliseconds.
Default
NA
Command Mode
Privileged User
Example
This example sets the delay to 200 ms, the initial holdtime is set to 400 ms and the maximum
holdtime is set to 10 seconds.
(config-data)# router ospf
(conf-router) # timers throttle spf 200 400 10000
75.2.2.79.2.7 max-metric router-lsa
This command sets the time (seconds) to advertise self as stub-router.
Syntax
max-metric router-lsa {on-startup|on-shutdown} number
max-metric router-lsa administrative
no max-metric router-lsa [on-startup|on-shutdown|administrative]
Command Description
on-startup Defines the time (seconds) to advertise self as stub-router.
on-shutdown Defines the time (seconds) to wait till full shutdown.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English