Version 7.2 737 Mediant MSBR
Reference Guide 75. Layer-3 Commands
Default
NA
Command Mode
Privileged User
Example
This example sets the RIP enable interface by ifname.
# configure data
(config-data)# router ripng
(conf-router)# network vlan 1
75.2.2.81.5.5 passive-interface
This command suppresses routing updates on an interface.
Syntax
passive-interface ifname
no passive-interface ifname
Interface Type (ifname) Interface ID
gigabitethernet GigabitEthernet interface slot
and port (VLAN ID is optional)
[Slot/Port.VLAN ID]
cellular Cellular interface ID 0/0
gre Tunnel GRE ID [1-255]
ipip Tunnel IPIP ID [1-255]
l2tp L2TP ID [0-99]
pppoe PPPoE interface ID [1-3]
pptp PPTP ID [0-99]
vlan Vlan ID [1-3999]
loopback Loopback ID [1-5]
bvi Bridge interface [1-255]
Default
NA
Command Mode
Privileged User
To Next Page
Loading...
