AudioCodes Mediant MSBR Series User Manual

Reference Guide 738 Document #: LTRT-17939
Mediant MSBR
Example
This example sets the specified interface to passive mode.
# configure data
(config-data)# router rip
(conf-router)# passive-interface vlan 1
75.2.2.81.5.6 route
This command sets up a static route.
Syntax
route <route map tag> deny <sequence>
route <route map tag> permit <sequence>
route <route map tag> vrf <VRF table> deny|permit <sequence>
Command Description
route map tag Defines the route map tag.
deny Route map denies set operations.
permit Route map permits set operations.
vrf Associate with the defined VRF.
VRF table Defines the VRF table name.
sequence Defines the sequence to insert to/delete from an existing
route-map entry. Range is 1-65535.
Interface Type (ifname) Interface ID
gigabitethernet GigabitEthernet interface slot
and port (VLAN ID is optional)
[Slot/Port.VLAN ID]
cellular Cellular interface ID 0/0
gre Tunnel GRE ID [1-255]
ipip Tunnel IPIP ID [1-255]
l2tp L2TP ID [0-99]
pppoe PPPoE interface ID [1-3]
pptp PPTP ID [0-99]
vlan Vlan ID [1-3999]
loopback Loopback ID [1-5]
bvi Bridge interface [1-255]
Default
NA

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English