AudioCodes Mediant MSBR Series - Page 739

Version 7.2 739 Mediant MSBR
Reference Guide 75. Layer-3 Commands
Command Mode
Privileged User
Example
The following is an example of how this command can be used.
# configure data
(config-data)# router ripng
(conf-router)# route AAAtag deny 10
75.2.2.81.5.7 route-map
This command sets up a route-map.
Syntax
route <rmap_name> in|out <ifname>
Command Description
rmap_name Defines the route map name.
in Defines the route map for input filtering.
out Defines the route map for output filtering.
Default
NA
Command Mode
Privileged User
Example
The following is an example of how this command can be used.
# configure data
(config-data)# router ripng
(conf-router)# route AAAmap in vlan 2
75.2.2.81.5.8 timers basic
This command configures timers in the RIPng protocol.
Syntax
timers basic <routing_table_timer> <routing_timeout_timer>
<garbage_collection_timer>