6-4
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 6 Create Circuits and Low-Order Tunnels
Before You Begin
Table 6-3 shows the circuit source and destination options for VC11 and VC12 circuits.
Table 6-4 shows the options that appear for high-order circuits.
Table 6-3 CTC Circuit Source and Destination Options for Low-Order VC12 or VC11 Circuits
Card Ports VC4s VC3/TUG3s TUG2s VC11s/VC12s
E1-N-14 14 — — — 1 per port
E1-42 42 — — — 1 per port
STM1E-12 12 1 per port 3 per VC4 7 per TUG3 3 per TUG2
OC3 IR 4/STM1 4 1 per port 3 per VC4 7 per TUG3 3 per TUG2
OC3 IR 4/STM1-8 8 1 per port 3 per VC4 7 per TUG3 3 per TUG2
OC12 IR/STM4 SH 1310
OC12 LR/STM4 LH 1310
OC12 LR/STM4 LH 1550
1 4 per port 3 per VC4 7 per TUG3 3 per TUG2
OC12 IR/STM4 SH 1310-4 4 4 per port 3 per VC4 7 per TUG3 3 per TUG2
All OC-48/STM16 cards
(includes ML-Series card)
1 16 per port 3 per VC4 7 per TUG3 3 per TUG2
OC-192/STM64 1 64 per port 3 per VC4 7 per TUG3 3 per TUG2
MRC-12 12 1, 4, or 16
1
per port
1. The number of VC4s depends on the SFP used as well as available backplane width and existing provisioned lines. For
additional details, refer to the “Optical Cards” chapter in the Cisco ONS 15454 SDH Reference Manual.
3 per VC4 7 per TUG3 3 per TUG2
FC_MR-4 4— ———
Table 6-4 CTC Circuit Source and Destination Options for High-Order VC4 Circuits
Card Ports VC4s
E1-42 — 1
STM1E-12 12 1 per port
OC3 IR 4/STM1 4 1 per port
OC3 IR 4/STM1-8 8 1 per port
OC12 IR/STM4, OC12 LR/STM4 1 4 per port
OC12 IR 4/STM4, OC12 LR 4/STM4 4 4 per port
All OC-48/STM16 cards (includes ML-Series card) 1 16 per port
OC-192/STM64 1 64 per port
MRC-12 cards 12 64 per port
FC_MR-4 4 1, 4, or 16
1
per port
1. The number of VC4s depends on the SFP used as well as available backplane width and existing provisioned lines.
For additional details, refer to the “Optical Cards” chapter in the Cisco ONS 15454 SDH Reference Manual.
To Next Page
Loading...
