11-4
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 11 Change Node Settings
NTP- D202 Customize the CTC Network View
• DLP-D180 Edit the OSI Subnetwork Point of Attachment, page 18-68
• DLP-D181 Edit an IP-Over-CLNS Tunnel, page 18-69
• DLP-D182 Delete an IP-Over-CLNS Tunnel, page 18-70
Step 4 Complete the “NTP-D108 Back Up the Database” procedure on page 15-5.
Stop. You have completed this procedure.
NTP-D202 Customize the CTC Network View
Step 1 Complete the “DLP-D60 Log into CTC” task on page 17-49. If you are already logged in, continue with
Step 2.
Step 2 Complete the following tasks, as needed:
• DLP-D145 Change the Network View Background Color, page 18-36
• DLP-D435 Change the Default Network View Background Map, page 21-24
• DLP-D268 Apply a Custom Network View Background Map, page 19-73
• DLP-D148 Create Domain Icons, page 18-40
• DLP-D149 Manage Domain Icons, page 18-41
• DLP-D393 Switch Between TDM and DWDM Network Views, page 20-82
• DLP-D269 Enable Dialog Box Do-Not-Display Option, page 19-74
• DLP-D215 Consolidate Links in Network View, page 19-11
Stop. You have completed this procedure.
Purpose This procedure modifies the CTC network view, including grouping nodes
into domains for a less-cluttered display, changing the network view
background color, and using a custom image for the network view
background.
Tools/Equipment None
Prerequisite Procedures None
Required/As needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
To Next Page
Loading...
