17-49
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 17 DLPs D1 to D99
DLP- D60 Log into CTC
DLP-D60 Log into CTC
Note For information about CTC views and navigation, see Appendix A, “CTC Information and Shortcuts.”
Step 1 From the computer connected to the ONS 15454 SDH, start Netscape (PC or UNIX) or Internet Explorer
(PC only):
• If you are using a PC, launch Netscape or Internet Explorer from the Windows Start menu or a
shortcut icon.
–
To install Netscape colors for Netscape use, type:
# netscape -install
–
To limit Netscape to 32 colors so that if the requested color is not available, Netscape chooses
the closest color option, type:
netscape -ncols 32
Note CTC requires a full 24-color palette to run properly. When using color-intensive applications
such as Netscape in UNIX, it is possible that UNIX could run out of colors to use for CTC.
The -install and -ncols 32 command line options limit the number of colors that Netscape
uses.
Step 2 In the Netscape or Internet Explorer web address (URL) field, enter the ONS 15454 SDH IP address. For
initial setup, use the default address, 192.1.0.2. (This IP address appears on the LCD. You can suppress
the LCD IP address display using CTC. For more information, see the “DLP-D266 Change IP Settings”
task on page 19-72.) Press Enter.
Purpose This task logs into CTC.
Tools/Equipment None
Prerequisite Procedures NTP-D278 Set Up Computer for CTC, page 3-2
One of the following procedures:
• NTP-D260 Set Up CTC Computer for Local Craft Connection to the
ONS 15454 SDH, page 3-3
• NTP-D261 Set Up a Computer for a Corporate LAN Connection to the
ONS 15454 SDH, page 3-5
• NTP-D262 Set Up a Remote Access Connection to the
ONS 15454 SDH, page 3-6
Required/As Needed Required
Onsite/Remote Onsite or remote
Security Level Retrieve or higher
To Next Page
Loading...
