Cisco ONS 15454 SDH - Table 1-1 Cable Models and Model Numbers; User-Supplied Equipment

1-3
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 1 Install the Shelf and FMECs
Required Tools and Equipment
• RJ-45 cable assembly, Ethernet (1)
• Power cable (from fuse and alarm panel to MIC-A/P and MIC-C/T/P) (2)
Caution Only use the power cables that are designed to be used with ONS 15454 SDH. They are sold separately.
Table 1-1 lists the different ONS 15454 SDH cable models and their model numbers. The xxx
corresponds to the length of the cable, in meters.
User-Supplied Equipment
The following materials and tools are required for installation but are not supplied with the
ONS 15454 SDH:
• Equipment rack (ETSI rack, 2200 mm [86.6 inch] H x 600 mm [23.6 inch] W
x 300 mm [11.8 inch] D)
• Fuse and alarm panel
• Copper ground cable 13.3-mm² (#6 AWG) stranded, specified for up to 90 degrees Celsius
(194 degrees Fahrenheit)
• Alarm cable pairs for all alarm connections, 0.51 mm² or 0.64 mm² (#22 or #24 AWG), solid-tinned
• Single-mode SC fiber jumpers with UPC polish (55 dB or better) for optical cards
• Coaxial cable terminated with 1.0/2.3 miniature coax connectors for FMEC cards
• DB-37 cable
• Shielded building integrated timing supply (BITS) clock coaxial cable terminated with
1.0/2.3 miniature coax connectors
• Labels
Table 1-1 Cable Models and Model Numbers
Cable Model Type Model Number Description
Power Cables 15454E-PWRCBL-xxx Power cable assembly, DB-3 connector to
unterminated, ONS 15454 SDH
Alarm Cables 15454E-ALMCBL-xxx Alarm cable assembly, HDB-62 connector to
unterminated, ONS 15454 SDH
Timing Cables 15454E-T54 or
1.0/2.3CBL-xxx
E1/E3/DS-3/Timing cable assembly, 75 ohm,
T54 or 1.0/2.3 connector to unterminated,
ONS 15454 SDH
15454E-120TMGCBL 120-ohm to 75-ohm converter cable assembly,
wire-wrap to T54 or 1.0/2.3, ONS 15454 SDH
E1, E3, DS-3, and
Timing Cables
15454E-T54 or
1.0/2.3CBL-xxx
E1/E3/DS-3/Timing cable assembly, 75 ohm,
T54 or 1.0/2.3 connector to unterminated,
ONS 15454 SDH
E1N-14 Cables 15454E-DBCBL-xxx E1 cable assembly, 14-pair, 120-ohm, DB37
connector to unterminated, ONS 15454 SDH
E1-42 Cables 15454E-E1-120-xxx E1 cable assembly, 42-pair, 120-ohm, LFH
connector to unterminated, ONS 15454 SDH