15-9
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 15 Maintain the Node
NTP- D163 Restore the Node to Factory Configuration
• DLP-D184 View ES-IS Routing Information Base, page 18-71
• DLP-D185 Manage the TARP Data Cache, page 18-72
Stop. You have completed this procedure.
NTP-D163 Restore the Node to Factory Configuration
Caution Cisco strongly recommends that you keep different node databases in separate folders. This is because
the reinitialization tool chooses the first product-specific software package in the specified directory if
you use the Search Path field instead of the Package and Database fields. You might accidentally copy
an incorrect database if multiple databases are kept in the specified directory.
Caution Restoring a node to the factory configuration deletes all cross-connects on the node.
Caution Cisco recommends that you save the node database to safe location if you will not be restoring the node
using the database provided on the software CD.
Purpose This procedure reinitializes the ONS 15454 SDH using the CTC
reinitialization tool. Reinitialization uploads a new software package to
the TCC2/TCC2P cards, clears the node database, and restores the
factory default parameters.
Tools/Equipment ONS 15454 SDH System Software CD, Version 7.0.x
Java Runtime Environment (JRE) 1.4.2 or JRE 5.0 must be installed on
the computer to log into the node at the completion of the
reinitialization. The reinitialization tool can run on JRE 1.3.1_02,
JRE 1.4.2, or JRE 5.0.
Prerequisite Procedures NTP-D108 Back Up the Database, page 15-5
NTP-D278 Set Up Computer for CTC, page 3-2
And one of the following:
• NTP-D260 Set Up CTC Computer for Local Craft Connection to the
ONS 15454 SDH, page 3-3
• NTP-D261 Set Up a Computer for a Corporate LAN Connection to
the ONS 15454 SDH, page 3-5
Required/As Needed As needed
Onsite/Remote Onsite
Security Level Superuser
To Next Page
Loading...
