18-51
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 18 DLPs D100 to D199
DLP- D161 Delete a User on Multiple Nodes
Step 1 From the View menu, choose Go to Network View. Verify that you can access all the nodes where you
want to add users.
Step 2 Click the Provisioning > Security > Users tabs. Highlight the user’s name whose settings you want to
change.
Step 3 Click Change. The Change User dialog box appears.
Step 4 In the Change User dialog box, enter the following information:
• New Password
• Confirm New Password
• Security Level
See the “DLP-D75 Create a New User on Multiple Nodes” task on page 17-66 for field descriptions.
Step 5 Under “Select applicable nodes,” uncheck any nodes where you do not want to change the user’s settings
(all network nodes are selected by default).
Step 6 Click OK. A Change Results confirmation dialog box appears.
Step 7 Click OK to acknowledge the changes.
Step 8 Return to your originating procedure (NTP).
DLP-D161 Delete a User on Multiple Nodes
Note You cannot delete a user who is currently logged in. To log out a user, you can complete the “DLP-D316
Log Out a User on Multiple Nodes” task on page 20-8, or you can choose the “Logout before delete”
option on the Delete User dialog box.
Note CTC will allow you to delete other Superuser only if at least one Superuser remains. For example, you
can delete the CISCO15 user only if you have created another Superuser. Use this option with caution.
Step 1 From the View menu, choose Go to Network View.
Step 2 Click the Provisioning > Security > Users tabs. Highlight the name of the user you want to delete.
Step 3 Click Delete. The Delete User dialog box appears.
Step 4 Click OK. A Change Results confirmation dialog box appears.
Step 5 Click OK to acknowledge the changes. Confirm that the changes appear; if not, repeat the task.
Purpose This task deletes an existing user from multiple nodes.
Tools/Equipment None
Prerequisite Procedures DLP-D60 Log into CTC, page 17-49
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Superuser
To Next Page
Loading...
