Cisco ONS 15454 SDH - Chapter 10 Change Card Setting

10-3
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 10 Change Card Settings
NTP- D118 Modify Alarm Interface Controller–International Settings
Caution Changing card settings can be service affecting. You should make all changes during a scheduled
maintenance window.
Step 1 Complete the “DLP-D60 Log into CTC” task on page 17-49 at the node where you want to change the
STM-N card settings. If you are already logged in, proceed to Step 2.
Step 2 As needed, complete the “NTP-D108 Back Up the Database” procedure on page 15-5.
Step 3 Perform any of the following tasks as needed:
• DLP-D108 Change Line Settings for STM-N Cards, page 18-9
• DLP-D343 Change SDH Threshold Settings for STM-N Cards, page 20-54
• DLP-D109 Change Optics Thresholds Settings for STM-64 and MRC-12 Cards, page 18-12
• DLP-D216 Change the STM-N Card ALS Maintenance Settings, page 19-14
Note To change settings on the Provisioning > VC4 tab, go to the “DLP-D122 Enable Intermediate
Path Performance Monitoring” task on page 18-21. To change settings on the Alarm Profiles tab,
see Chapter 9, “Manage Alarms.”
Step 4 Complete the “NTP-D108 Back Up the Database” procedure on page 15-5.
Stop. You have completed this procedure.
NTP-D118 Modify Alarm Interface Controller–International
Settings
Step 1 Complete the “DLP-D60 Log into CTC” task on page 17-49 at the node where you want to change the
AIC-I card settings. If you are already logged in, proceed to Step 2.
Step 2 As needed, complete the “NTP-D108 Back Up the Database” procedure on page 15-5.
Step 3 Perform any of the following tasks as needed:
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
Purpose This procedure changes the AIC-I card external alarms and controls
(environmental alarms) and changes orderwire settings.
Tools/Equipment None
Prerequisite Procedures NTP-D247 Provision External Alarms and Controls on the Alarm Interface
Controller–International, page 9-8 and the DLP-D83 Provision Orderwire,
page 17-76.
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher