18-40
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 18 DLPs D100 to D199
DLP- D148 Create Domain Icons
• Provisioning > SNMP window
• Provisioning > Timing > General and BITS Facilities windows
• Provisioning > OSI > Main Setup window
• Provisioning > OSI > TARP > Config window
• Provisioning > Cross-Connect window
• Provisioning > WDM-ANS > Node Setup window
• Maintenance > Cross-Connect > Cards window
• Maintenance > Database window
• Maintenance > Diagnostic window
• Maintenance > Protection window
• Maintenance > Timing > Source window
• Maintenance > DWDM > ROADM Power Monitoring window
Step 7 Click OK.
Step 8 In the Save dialog box, enter a name in the File name field using one of the following formats:
• Filename.html for HTML files
• Filename.csv for CSV files
• Filename.tsv for TSV files
Step 9 Navigate to a directory where you want to store the file.
Step 10 Click OK.
Step 11 Repeat the task for each window that you want to export.
Step 12 Return to your originating procedure (NTP).
DLP-D148 Create Domain Icons
Note Domains created by one user are visible to all users who log into the network.
Note To allow users of any security level to create local domains, that is, domains that are visible on the home
CTC session only, superusers can change the CTC.network.LocalDomainCreationAndViewing NE
default value to TRUE. A TRUE value means any user can maintain the domain information in his or her
Purpose This task creates a domain, which is an icon that groups ONS 15454 SDH
icons in CTC network view.
Tools/Equipment None
Prerequisite Procedures DLP-D60 Log into CTC, page 17-49
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Superuser
To Next Page
Loading...
