17-47
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 17 DLPs D1 to D99
DLP- D54 Delete a Node from a Specified Login Node Group
DLP-D54 Delete a Node from a Specified Login Node Group
Step 1 From the CTC Edit menu, choose Preferences.
Step 2 In the Preferences dialog box, click the Login Node Groups tab.
Step 3 Click the Login Node Group tab containing the node you want to remove.
Step 4 Click the node you want to remove, then click Remove.
Step 5 Click OK.
Step 6 Return to your originating procedure (NTP).
DLP-D56 Disable Proxy Service Using Internet Explorer (Windows)
Step 1 From the Start menu, select Settings > Control Panel.
Note If you computer is running Windows XP, you can select Control Panel directly from the Start
menu. Make sure you are in Classic View before continuing with this procedure.
Step 2 In the Control Panel window, choose Internet Options.
Step 3 In the Internet Properties dialog box, click Connections > LAN Settings.
Step 4 In the LAN Settings dialog box, complete one of the following tasks:
• Uncheck Use a proxy server to disable the service.
Purpose This task removes a node from a specified login node group. To remove a
node from the current login node group, see “DLP-D35 Delete a Node from
the Current Session or Login Group” task on page 17-27.
Tools None
Prerequisite Procedures DLP-D60 Log into CTC, page 17-49
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
Purpose This task disables proxy service for PCs running Internet Explorer.
Tools/Equipment None
Prerequisite Procedures NTP-D278 Set Up Computer for CTC, page 3-2
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level None
To Next Page
Loading...
