Cisco ONS 15454 SDH - Perform a Facility (Line) Loopback on a Destination-Node MXP;TXP;FC_MR Port

2-5
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 2 Install Cards and Fiber-Optic Cable
NTP- D15 Install the Common Control Cards
In Table 2-2, X indicates that a card is supported in the slot. The multiservice (traffic) slots, Slots 1 to 6
and 12 to 17, include four slots (Slots 5, 6, 12, and 13) that have four times the bandwidth of the other
multiservice slots.
OC192
IR/STM64 SH
1550
Not supported with XC-VXL-2.5G cards. Requires XC-VXL-10G or XC-VXC-10G cards.
OC192
LR/STM64 LH
1550
Not supported with XC-VXL-2.5G cards. Requires XC-VXL-10G or XC-VXC-10G cards.
OC192
LR/STM64 LH
ITU 15xx.xx
Not supported with XC-VXL-2.5G cards. Requires XC-VXL-10G or XC-VXC-10G cards.
FC_MR-4 XXXXXX XXXXXX
15454_MRC-12
2
Not supported with XC-VXL-2.5G cards. Requires XC-VXL-10G or XC-VXC-10G cards.
OC192SR1/
STM64IO Short
Reach and
OC192/STM64
Any Reach
3
Not supported with XC-VXL-2.5G cards. Requires XC-VXL-10G or XC-VXC-10G cards.
1. The term XC is used generically to mean cross-connect card.
2. Designated as MRC-12 in CTC.
3. Designated as STM64-XFP in CTC.
Table 2-1 ONS 15454 SDH Card and Slot Compatibility for the XC-VXL-2.5G Cards (continued)
Slot 1234567 89 1011 121314151617
Type MS MS MS MS MS MS
TCC2/
TCC2P XC
1
AIC-I XC
1.
TCC2/
TCC2PMSMSMSMSMSMS
Table 2-2 Slot Compatibility for the XC-VXL-10G or XC-VXC-10G Card
Slot 1234567 89 1011 121314151617
Type MS MS MS MS MS MS
TCC2/
TCC2P XC
1
AIC-I XC
1
TCC2/
TCC2PMSMSMSMSMSMS
TCC2/TCC2P X X
XC-VXL-10G X X
XC-VXC-10G X X
AIC-I X
DS3i-N-12 XXXXX XXXXX
E1-N-14 XXXXX XXXXX
E1-42 XXXX XXXX
E3-12 XXXXX XXXXX
STM1E-12 XXXX XXXX
E100T-G XXXXXX XXXXXX
E1000-2-G XXXXXX XXXXXX