18-27
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 18 DLPs D100 to D199
DLP- D132 Provision a Multirate PPM on the MRC-12 Card
DLP-D132 Provision a Multirate PPM on the MRC-12 Card
Step 1 In node view, double-click the MRC-12 card where you want to provision PPM settings.
Step 2 Click the Provisioning > Pluggable Port Modules tabs.
Step 3 In the Pluggable Port Modules area, click Create. The Create PPM dialog box appears.
Step 4 In the Create PPM dialog box, complete the following:
• PPM—Choose the slot number where the SFP is installed from the drop-down list.
• PPM Type—Choose the number of ports supported by your SFP from the drop-down list. If only one
port is supported, PPM (1 port) is the only option.
Step 5 Click OK. The newly created port appears in the Pluggable Port Modules are. The row in the Pluggable
Port Modules are turns light blue and the Actual Equipment Type column lists the equipment name.
Step 6 Verify that the PPM appears in the list in the Pluggable Port Modules area. If it does not, repeat Steps 4
through 5.
Step 7 Repeat the task to provision a second PPM.
Step 8 Click OK.
Step 9 Continue with the “DLP-D133 Provision the Optical Line Rate on the MRC-12 Card” task on page 18-27
to provision the line rate.
Step 10 Return to your originating procedure (NTP).
DLP-D133 Provision the Optical Line Rate on the MRC-12 Card
Step 1 In node view, double-click the MRC-12 card where you want to provision PPM settings.
Step 2 Click the Provisioning > Pluggable Port Modules tabs.
Purpose This task provisions PPMs for the MRC-12 card. Single-rate SFPs do not
require provisioning.
Tools/Equipment None
Prerequisite Procedures DLP-D60 Log into CTC, page 17-49
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
Purpose This task provisions the optical line rate on a multirate PPM. Single-rate
SFPs do not require line rate provisioning.
Tools/Equipment None
Prerequisite Procedures DLP-D60 Log into CTC, page 17-49
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
To Next Page
Loading...
