Cisco ONS 15454 SDH - Figure 18-10 Selecting CTC Data for Export

18-39
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 18 DLPs D100 to D199
DLP- D147 Export CTC Data
Step 2 If you want to export detailed circuit information, complete the following:
a. In the Circuits window, choose a circuit and click Edit to open it in the Edit Circuits window.
b. In the Edit Circuits window, choose the desired tab: Drops, SNCP Selectors,
SNCP Switch Counts, State, or Merge.
Note Depending upon your configuration, you may or may not see all of the above tabs when you
click Edit.
Step 3 Choose Export from the File menu.
Step 4 In the Export dialog box, click a data format (Figure 18-10):
• As HTML—Saves data as a simple HTML table file without graphics. The file must be viewed or
edited with applications such as Netscape Navigator, Microsoft Internet Explorer, or another
application capable of opening HTML files.
• As CSV—Saves the CTC table as comma-separated values (CSV). This option does not apply to the
Maintenance > Timing > Report window.
• As TSV—Saves the CTC table as tab-separated values (TSV).
Figure 18-10 Selecting CTC Data For Export
Step 5
If you want to open a file in a text editor or word processor application, procedures vary. Typically, you
can use the File > Open command to view the CTC data, or you can double-click the file name and
choose an application such as Notepad.
Text editor and word processor applications format the data exactly as it is exported, including comma
or tab separators. All applications that open the data files allow you to format the data.
Step 6 If you want to open the file in spreadsheet and database management applications, procedures vary.
Typically, you need to open the application, choose File > Import, and then choose a delimited file to
format the data in cells.
Spreadsheet and database management programs also allow you to manage the exported data.
Note An exported file cannot be opened in CTC.
The export operation does not to apply to:
• Circuits (Edit option, General and Monitor windows)
• Provisioning > General > General and Power Monitor windows
• Provisioning > Network > General window
• Provisioning > Security > Policy, Access, and Legal Disclaimer windows