Cisco ONS 15454 SDH - DLP- D14 Create a Four-Fiber MS-Spring Using the MS-Spring Wizard

17-11
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 17 DLPs D1 to D99
DLP- D14 Create a Four-Fiber MS-SPRing Using the MS-SPRing Wizard
Figure 17-4 Removing the ONS 15454 SDH Front Door
Step 4
Return to your originating procedure (NTP).
DLP-D14 Create a Four-Fiber MS-SPRing Using the MS-SPRing Wizard
Step 1 From the View menu, choose Go to Network View.
Step 2 Click the Provisioning > MS-SPRing tabs.
Step 3 Click Create MS-SPRing.
Step 4 In the MS-SPRing Creation dialog box, set the MS-SPRing properties:
• Ring Type—Choose four-fiber.
Purpose This task creates a four-fiber MS-SPRing using the MS-SPRing wizard.
Tools/Equipment None
Prerequisite Procedures DLP-D60 Log into CTC, page 17-49
Required/As Needed As needed; required to complete MS-SPRing setup
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
61237
FAN FA IL
CRIT
MAJ
MIN
Door hinge
Assembly hinge pin
Assembly hinge
Translucent
circles
for LED
viewing