Cisco ONS 15454 SDH - Ether Ports Statistics on the Card View Performance Window

18-76
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 18 DLPs D100 to D199
DLP- D188 View CE-Series Ethernet and POS Ports Statistics PM Parameters
Figure 18-12 Ether Ports Statistics on the Card View Performance Window
Step 3
Click Refresh. PM statistics for each port on the card appear.
Step 4 View the PM parameter names that appear in the Param column. The PM parameter values appear in the
Port # columns. For PM parameter definitions, refer to the “Performance Monitoring” chapter in the
Cisco ONS 15454 SDH Reference Manual.
Note To refresh, reset, or clear PM counts, see the “NTP-D257 Change the PM Display” procedure
on page 8-2.
Step 5 Return to your originating procedure (NTP).
124471
Performance
tab
Statistics
tab
Ether ports
tab
Card
view
Auto-refresh
drop-down list
Refresh
button
Help
button
Clear
button
Baseline
button