17-51
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 17 DLPs D1 to D99
DLP- D61 Create Login Node Groups
Note The CISCO15 user is provided with every ONS 15454 SDH. CISCO15 has superuser privileges,
so you can create other users. You must create another Superuser before you can delete the
CISCO15 user. CISCO15 is delivered with the otbu+1 password. To change the password for
CISCO15, click the Provisioning > Security tabs after you log in and change the password. To
set up ONS 15454 SDH users and assign security, go to the “NTP-D30 Create Users and Assign
Security” procedure on page 4-4. For more information about security, refer to the “Security”
chapter in the Cisco ONS 15454 SDH Reference Manual.
Step 4 Each time you log into an ONS 15454 SDH, you can make selections for the following login options:
• Node Name—Displays the IP address entered in the web browser and a drop-down list of previously
entered ONS 15454 SDH IP addresses. You can select any ONS 15454 SDH on the list for the login,
or you can enter the IP address (or node name) of any new node where you want to log in.
• Additional Nodes—Displays a list of current login node groups. To create a login node group or add
additional groups, see the “DLP-D61 Create Login Node Groups” task on page 17-51.
• Disable Network Discovery—Check this box to view only the ONS 15454 SDH (and login node
group members, if any) entered in the Node Name field. Nodes linked to this node through DCCs
are not discovered and will not appear in CTC network view. Using this option can decrease the CTC
startup time in networks with many DCC-connected nodes and reduces memory consumption.
• Disable Circuit Management—Check this box to disable discovery of existing circuits. Using this
option can decrease the CTC initialization time in networks with many existing circuits and reduces
memory consumption. This option does not prevent the creation and management of new circuits.
Step 5 Click Login.
If login is successful, the CTC window appears. From here, you can navigate to other CTC views to
provision and manage the ONS 15454 SDH. If you need to turn up the shelf for the first time, see
Chapter 4, “Turn Up a Node.” If login problems occur, refer to the Cisco ONS 15454 SDH
Troubleshooting Guide.
Step 6 Return to your originating procedure (NTP).
DLP-D61 Create Login Node Groups
Step 1 From the Edit menu, choose Preferences.
Step 2 Click Login Node Group and Create Group.
Step 3 Enter a name for the group in the Create Login Group Name dialog box. Click OK.
Purpose This task creates a login node group to display ONS 15454 SDHs that have
an IP connection but not a DCC connection to the login node.
Tools/Equipment None
Prerequisite Procedures DLP-D60 Log into CTC, page 17-49
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
To Next Page
Loading...
