Cisco ONS 15454 SDH - DLP- D111 Changing the Maximum Number of Session Entries for Alarm History

18-14
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 18 DLPs D100 to D199
DLP- D111 Changing the Maximum Number of Session Entries for Alarm History
DLP-D111 Changing the Maximum Number of Session Entries for Alarm History
Step 1 From the Edit menu, choose Preferences.
The CTC Preferences dialog box appears (Figure 18-4).
Figure 18-4 CTC Preferences Dialog Box
Step 2
Click the up or down arrow buttons next to the Maximum History Entries field to change the entry.
Step 3 Click Apply and OK.
Note Setting the Maximum History Entries value to the high end of the range uses more CTC memory
and could impair CTC performance.
Purpose This task changes the maximum number of session entries included in the
alarm history. Use this task to extend the history list in order to save
information for future reference or troubleshooting.
Tools/Equipment None
Prerequisite Procedures DLP-D60 Log into CTC, page 17-49
Required/As Needed As needed
Onsite/Remote
Onsite or remote
Security Level
Provisioning or higher