Cisco ONS 15454 SDH - Figure

18-4
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 18 DLPs D100 to D199
DLP- D104 Install the Fiber Clip on 15454_MRC-12 Cards
Figure 18-1 Installing the Fiber Clip
Step 3
Push the clip into the hole until the locking tab snaps the clip securely into place. To remove a fiber clip,
push on the locking tab to release the clip while rotating the clip forward and up.
Step 4 Return to your originating procedure (NTP).
Locking Tab
Fiber Clip
Long Fiber Clip
Short Fiber Clip
Faceplate
hole
137638