20-42
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 20 DLPs D300 to D399
DLP- D365 Change Line and Threshold Settings for E1-N-14 or E1-42 Cards
Table 20-12 describes the values on the Provisioning > Elect Path Thresholds tab for the E-1 cards.
Table 20-13 describes the values on the Provisioning > SDH Thresholds tab for the E-1 cards.
SES Severely errored seconds
LOSS The number of one-second intervals containing one or more loss of signal
(LOS) defects.
15 Min radio button Clicking this radio button and then clicking Refresh will cause the threshold
values on this tab to display for 15-minute intervals.
1 Day radio button Clicking this radio button and then clicking Refresh will cause the threshold
values on this tab to display for 1-day intervals.
Table 20-11 Line Thresholds Options for E1-N-14 and E1-42 Cards (continued)
Parameter Description
Table 20-12 Electrical Path Threshold Options for E1-N-14 and E1-42 Cards
Parameter Description
Port (Display only) Port number
• 1 to 14 (E1-N-14 card)
• 1 to 42 (E1-42 card)
EB Errored blocks
BBE Background block errors
ES Errored seconds
SES Severely errored seconds
UAS Unavailable seconds
AISS Alarm indication signal
15 Min radio button Clicking this radio button and then clicking Refresh will cause the threshold
values on this tab to display for 15-minute intervals.
1 Day radio button Clicking this radio button and then clicking Refresh will cause the threshold
values on this tab to display for 1-day intervals.
Table 20-13 SDH Threshold Options for E1-N-14 and E1-42 Cards
Parameter Description
Port (Display only) E-1 port
• 1 to 14 (E1-N-14 card)
• 1 to 42 (E1-42 card)
ES Errored seconds
SES Severely errored seconds
EB Errored blocks
UAS Unavailable seconds
BBE Background block errors
To Next Page
Loading...
