Cisco ONS 15454 SDH - DLP- D144 Disable OSPF

18-36
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 18 DLPs D100 to D199
DLP- D144 Disable OSPF
DLP-D144 Disable OSPF
Note Disabling OSPF can cause the TCC2/TCC2P card to reboot. A TCC2/TCC2P card reboot causes a
temporary loss of connectivity to the node, but traffic is unaffected.
Step 1 In node view, click the Provisioning > Network > OSPF tabs. The OSPF subtab has several options.
Step 2 In the OSPF on LAN area, uncheck the OSPF active on LAN? check box.
Step 3 Click Apply.
Step 4 Return to your originating procedure (NTP).
DLP-D145 Change the Network View Background Color
Note If you modify background colors, the change is stored in your CTC user profile on the computer. The
change does not affect other CTC users.
Step 1 From the View menu, choose Go to Network View.
Step 2 If you want to change a domain background, double-click the domain. If not, continue with Step 3.
Step 3 Right-click the network view or domain map area and choose Set Background Color from the shortcut
menu.
Step 4 In the Choose Color dialog box, select a background color.
Step 5 Click OK.
Purpose This task disables the Open Shortest Path First (OSPF) routing protocol
process for an ONS 15454 SDH LAN.
Tools/Equipment None
Prerequisite Procedures DLP-D60 Log into CTC, page 17-49
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
Purpose This task changes the network view background color or the domain view
background color (the area displayed when you open a domain).
Tools/Equipment None
Prerequisite Procedures DLP-D60 Log into CTC, page 17-49
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Retrieve or higher