16-3
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 16 Power Down the Node
NTP- D114 Power Down the Node
Note You cannot delete a TCC2/TCC2P card in CTC. Physically remove it after all the other cards
have been deleted and removed.
Step 13 Shut off the power from the power supply that feeds the node.
Step 14 Disconnect the node from its external fuse source.
Step 15 Store all the cards you removed and update inventory records according to local site practice.
Stop. You have completed this procedure.
To Next Page
Loading...
