6. Remove the impinging module.
WARNING! The module is heavy. Two people are recommended. The underside of the module is
fragile, particularly the impinging deflectors. Handle with care.
7. Remove the Impinging heater-controller enclosure on page 284.
8. To remove the left bracket:
●
Remove two T-20 screws on the left side and one T-20 screw to disconnect the window grounding
cable.
●
Remove two T-15 screws on the right side.
Take note of which screws are which. They have the same heads, but different thread sizes.
282 Chapter 8 Removal and installation ENWW
To Next Page
Loading...
