Lexmark C792 series - Page 145

Diagnostic information 2-105
5062
Go Back
Previous
Next
201.03, 201.05, 201.07, 201.08—Paper Jam error service check
5
Remove the staging deflector assembly. See
“Staging deflector assembly removal” on
page 4-140.
Is the cable connected correctly?
Go to step 6. Reseat the cable.
6
Replace the near narrow media sensor. See
“Sensor (input, S1, narrow media, near
narrow media) removal” on page 4-138.
Does the error reoccur?
Replace the system board.
See “System board
removal” on page 4-151.
Problem solved.
Step Questions / actions Yes No
1 Replace the fuser.
Does the problem clear?
Problem solved. Go to step 2.
2
Open the system board shield. Check the
cable in connector JFSR1 for proper
connection to the system card.
Is the cable connected correctly?
Go to step 3. Reseat the cable.
3
Check the cable for damage.
Is the cable damaged?
Replace the fuser system
card and LVPS cable. See
“Fuser system card and
LVPS cable removal” on
page 4-67.
Go to step 4.
Step Questions / actions Yes No