Lucent Technologies CBX 3500 - Page 26

xxvi1/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Contents
Beta Draft Confidential
Figure 10-12. Add PVC: Traffic Type Tab (FR-ATM) .................................... 10-54
Figure 10-13. Add PVC: User Preference Tab (FR-ATM)............................... 10-60
Figure 10-14. Add PVC: FRF.5 Tab (FR-ATM) .............................................. 10-66
Figure 10-15. Add PVC: Path Tab .................................................................... 10-68
Figure 10-16. Define Path Dialog Box.............................................................. 10-69
Figure 10-17. PNNI Node ATM Address Dialog Box...................................... 10-69
Figure 10-18. Add Point-to-Multipoint PVC Root Dialog Box........................ 10-72
Figure 10-19. Select Endpoint Dialog Box ....................................................... 10-73
Figure 10-20. Selecting an Endpoint From a Switch ........................................ 10-74
Figure 10-21. Selecting an Endpoint From a Physical Port .............................. 10-75
Figure 10-22. Add Point-to-Multipoint PVC Root: Administrative Tab .......... 10-76
Figure 10-23. Add Point-to-Multipoint PVC Root: Traffic Type Tab.............. 10-78
Figure 10-24. Choose VPN/Policy Dialog Box ................................................ 10-80
Figure 10-25. Add Point-to-Multipoint PVC Leaf Dialog Box ........................ 10-82
Figure 10-26. Add Point-to-Multipoint PVC Leaf: Administrative Tab........... 10-84
Figure 10-27. Add Point-to-Multipoint PVC Leaf: Accounting Tab................ 10-85
Figure 10-28. PMP Circuit Example................................................................. 10-87
Figure 10-29. Moving a Circuit Endpoint......................................................... 10-89
Figure 10-30. Move Circuit Endpoint Dialog Box............................................ 10-90
Figure 10-31. Select Endpoints Dialog Box...................................................... 10-91
Figure 10-32. Adding a PVC Based on a Template.......................................... 10-92
Figure 11-1. Connecting a PNNI Network........................................................ 11-2
Figure 11-2. Add PVC Dialog Box (MPVC).................................................... 11-5
Figure 11-3. Add Management VPI/VCI Dialog Box....................................... 11-9
Figure 11-4. Add Offnet Circuit Dialog Box .................................................. 11-12
Figure 11-5. Offnet EndPoint Selection Dialog Box....................................... 11-13
Figure 11-6. Add NMS path Dialog Box ........................................................ 11-15
Figure 12-1. Network TDs ................................................................................ 12-8
Figure 12-2. Add Traffic Descriptor Dialog Box.............................................. 12-9
Figure 12-3. ILMI Forward Traffic Descriptor Dialog Box............................ 12-11
Figure 12-4. Deleting a TD ............................................................................. 12-12
Figure 13-1. Layer 2 VPN Restrictive Mode Example..................................... 13-2
Figure 13-2. Layer 2 VPN Inclusive Mode Example........................................ 13-3
Figure 13-3. Add VPN Dialog Box................................................................... 13-4
Figure 13-4. Add Customer Dialog Box ........................................................... 13-6
Figure 13-5. Choose VPN/Policy Dialog Box .................................................. 13-7
Figure 14-1. Add Service Name Dialog Box .................................................... 14-4
Figure 14-2. Modify Service Name Dialog Box ............................................... 14-6
Figure 14-3. Select Backup LPort Dialog Box.................................................. 14-7
Figure 14-4. Modify Service Name Dialog Box Containing Backup
LPort Information......................................................................... 14-8
Figure 15-1. Adding a Service Name................................................................ 15-6
Figure 15-2. Add RLMI Service Name Dialog Box ......................................... 15-7
Figure 15-3. Select Backup LPort Dialog Box.................................................. 15-8
Figure 15-4. Modifying a Service Name........................................................... 15-9
Figure 15-5. Modify Service Name Dialog Box ............................................... 15-9
Figure 16-1. Native E.164 Address Converted to BCD Format........................ 16-3
Figure 16-2. Embedded E.164 AESA Format................................................... 16-3