Contents
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/05xxxi
Beta Draft Confidential
Table 7-7. Add Logical Port: PNNI Tab Fields..............................................7-39
Table 7-8. Add Psax Dialog Box Fields..........................................................7-43
Table 7-9. Add VNN Area Aggregate Dialog Box Fields..............................7-49
Table 7-10. Add VNN Virtual Link Dialog Box Fields....................................7-50
Table 7-11. Add VNN External route Aggregation Dialog Box Fields............7-53
Table 8-1. Supported Lucent Switches and Modules for ATMoMPLS
Trunking ..........................................................................................8-7
Table 8-2. Supported Juniper Routers and PICs for ATMoMPLS
Trunking ..........................................................................................8-7
Table 8-3. Add Logical Port: General Tab Fields...........................................8-19
Table 8-4. Add Logical Port: Administrative Tab Fields ...............................8-21
Table 8-5. Add Logical Port: ATM Tab Fields...............................................8-23
Table 8-6. Add Logical Port: ATM FCP Tab Fields ......................................8-27
Table 8-7. Add Logical Port: QoS Tab Fields ................................................8-28
Table 8-8. Add Logical Port: ILMI/OAM Tab...............................................8-31
Table 8-9. Add Logical Port: NTM Tab Fields...............................................8-33
Table 8-10. Add Logical Port: General Tab Fields...........................................8-36
Table 8-11. Add Logical Port: Administrative Tab Fields ...............................8-38
Table 8-12. Add Logical Port: QoS Tab Fields ................................................8-40
Table 8-13. Add Trunk: Administrative Tab ....................................................8-45
Table 9-1. PWE3 Tunnel Switch Guidelines....................................................9-6
Table 9-2. Add Hoplist Dialog Box Fields .......................................................9-9
Table 9-3. Add IntServ Dialog Box Fields .....................................................9-12
Table 9-4. Add DiffServ Dialog Box Fields...................................................9-14
Table 9-5. Modify Switch: MPLS Tab Fields.................................................9-18
Table 9-6. Add Logical Port Dialog Box Tabs ...............................................9-20
Table 9-7. Add Logical Port: General Tab Fields for POS LPorts.................9-21
Table 9-8. Add Logical Port: Administrative Tab Fields for
POS LPorts ....................................................................................9-23
Table 9-9. Add Logical Port: QoS Tab Fields ................................................9-25
Table 9-10. Add Logical Port: Trap Control Tab .............................................9-27
Table 9-11. Add Logical Port: MPLS Tab Fields.............................................9-29
Table 9-12. Add/Modify Logical Port: Point to Point Tab...............................9-31
Table 9-13. Add IP LPort Fields.......................................................................9-32
Table 9-14. Modify RSVP-TE Dialog Box Fields............................................9-35
Table 9-15. Add IP Interface Address Dialog Box Fields ................................9-39
Table 9-16. Add OSPF IP Interface Fields .......................................................9-40
Table 9-17. Add Tunnel: General Tab Fields ...................................................9-45
Table 9-18. Signalling Protocol Tabs in Add Tunnel Dialog Box....................9-47
Table 9-19. Add Tunnel: RSVP-TE Tab Fields................................................9-48
Table 9-20. Add Tunnel: Static Tab Fields.......................................................9-50
Table 9-21. Add Layer2 Tunnel: General Tab Fields.......................................9-53
Table 9-22. Add Layer 2 Tunnel: ATM Tab Fields..........................................9-55
Table 9-23. Add Layer 2 Tunnel: VNN Tab Fields..........................................9-56
Table 9-24. Add Layer 2 Tunnel: PNNI Tab Fields .........................................9-59
Table 9-25. Add LDP Entity Dialog Box Fields...............................................9-63
Table 9-26. Add PVC: Pwe3 Tab Fields...........................................................9-65
Table 10-1. PVC Endpoint Rules......................................................................10-4
To Next Page
Loading...
Need help?
General
