xxxii1/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Contents
Beta Draft Confidential
Table 10-2. Reliable Scalable Circuit ...............................................................10-8
Table 10-3. Add PVC: Administrative Tab Fields..........................................10-17
Table 10-4. Add PVC: Traffic Type Tab Fields.............................................10-23
Table 10-5. Add PVC: User Preference Tab Fields........................................10-27
Table 10-6. Add PVC: Traffic Mgmt Tab Fields............................................10-32
Table 10-7. Tabs Required for Configuring Redirect PVC Parameters..........10-37
Table 10-8. Cards Supporting FRF.5..............................................................10-41
Table 10-9. Rate Enforcement and Discard Policy.........................................10-45
Table 10-10. Rate Enforcement Schemes.........................................................10-46
Table 10-12. Add PVC: Traffic Type Tab Fields.............................................10-55
Table 10-13. Add PVC: User Preference Tab Fields........................................10-61
Table 10-14. Add PVC: FRF.5 Tab Fields .......................................................10-66
Table 11-1. Configuring Standard MPVC Attributes.......................................11-6
Table 11-2. Configuring Redirect MPVC Attributes........................................11-7
Table 11-3. Add Management VPI/VCI Dialog Box Fields...........................11-10
Table 12-1. QoS Classes...................................................................................12-3
Table 12-2. Traffic Parameters .........................................................................12-4
Table 12-3. QoS Class TDs...............................................................................12-6
Table 12-4. TD Types .......................................................................................12-9
Table 12-5. UNI Signaling Control Channel TD Defaults .............................12-13
Table 12-6. ILMI Control Channel TD Defaults............................................12-14
Table 12-7. Trunk Control Channel TD Defaults...........................................12-15
Table 12-8. PNNI Routing Control Channel TDs...........................................12-16
Table 13-1. Add VPN Dialog Box Fields.........................................................13-5
Table 13-2. Add Customer Dialog Box Fields..................................................13-6
Table 14-1. Add Service Name: Add RNNI/UNI Service Name Fields...........14-5
Table 15-1. RLMI Terms..................................................................................15-3
Table 16-1. AFI Default Values........................................................................16-4
Table 16-2. IDI Default Values.........................................................................16-5
Table 16-3. HO-DSP Default Values................................................................16-5
Table 16-4. Route Determination Example ....................................................16-10
Table 16-5. Called-party Address SVC Routing.............................................16-11
Table 16-6. SETUP Message Information Elements......................................16-12
Table 16-7. Calling Party Address Translation at Egress Port........................16-13
Table 16-8. Called Party Address Translation at Egress Port.........................16-14
Table 17-1. Configure SVC: General Tab Fields..............................................17-5
Table 17-2. TD Limits Dialog Box Fields ........................................................17-9
Table 17-3. Configure SVC: Signaling Tab Fields.........................................17-11
Table 17-5. Add Management VPCI Table Entry Dialog Box Fields............17-17
Table 17-6. Configure SVC: Address Tab Fields...........................................17-21
Table 17-7. Configure SVC: Connection ID Tab Fields.................................17-27
Table 17-8. Configure SVC: CUG Tab Fields................................................17-29
Table 17-9. Address Format Descriptions ......................................................17-32
Table 17-10. Add SVC Node Prefix: General Tab Fields ................................17-38
Table 17-11. Add SVC Port Prefix: Gateway Tab Fields.................................17-50
Table 17-12. Add SVC Port Prefix: General Tab Fields ..................................17-53
Table 17-13. ESI Byte Assignments.................................................................17-55
Table 17-14. Modify SVC Port Address: General Tab Fields..........................17-63
To Next Page
Loading...
Need help?
General
