Rockwell Automation Publication 2198-UM004D-EN-P - December 2022 123
Chapter 6 Use the Keypad Interface
Figure 75 - State Switch Machine of Setting
Turn DCHP On or Off
On the DHCP display, perform the following steps.
1. Press the key to enter the DHCP editing display.
2. Press the key to turn the switch OFF or ON.
3. Press the key to return to the DHCP editing display.
4. Press the key to return to the IP Setting display.
Setting
Network
Setting
Static IP
Subnet
Setting
IP Setting
Gateway
Setting
Number
Editing
Change
Numbers
Number
Editing
Number
Editing
Change
Numbers
Change
Numbers
Setting
Network
Setting
Static IP
DHCP
ON/OFF
To Next Page
Loading...
Need help?
General
